Hdpe Pipe With Floater For 18'' Dredger
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Hdpe pipe with floater for 18'' dredger
hdpe pipe appliance:
1. Transport sand\mud\slurry for dredger in dredging projects or sand suction projects and also for seawater treatment projects.
2. Transport mine tailings and slurry, metallurgical mines in the mining industry.
3. Transport pulverized coal and coal-water slurry of coal preparation plant in the coal industry.
4. Transport mud and corrosive media with slag in the chemical industry .
hdpe pipe Properties :
1.Specific Gravity, g/cm3, 20(C): 0.941-0.965
2.Longitudinal Reversion, % (110(C)): <=3
3.Oxidation Induciton Time, min (200(C)): >=20
4.Extension Rate at Break. %: >=350
5.Hydraulic Pressure Test:
1)20(C), Hoop Stress is 12.4 Mpa, 100h: No Failure.
2)80(C), Hoop Stress is 5.5Mpa, 165h: No Failure.
hdpe pipe floater Introduction
Dredging floats are composed of two empty half shells and can be filled with closed cell PU foam. They are connected to the pipe by galvanized bolts, nuts and flat washer.
PE Floats are generally moulded by a high wear resistant PE. The design is set up to achieve a strong but flexible float. Many different types of ring floats are available to suit requested application. These dredging floats / pipe floats are mainly used in offshore dredging
- Hdpe Dredger Pipe And Floats 5 Pieces / (Min. Order)
- Hdpe Pipe PN16 Undergroud For Water Supply 5 Pieces / (Min. Order)
- Mdpe Floater With PU Foam 5 Pieces / (Min. Order)
- Hdpe Dredger Pipe And Floats 5 Pieces / (Min. Order)
- Hdpe Pipe PN16 Undergroud For Water Supply 5 Pieces / (Min. Order)
- Dredge Pipeline 5 Pieces / (Min. Order)
- Pe Gas Pipeline SDR11 5 Pieces / (Min. Order)
- Undergroud HDPE Gas Pipe 5 Pieces / (Min. Order)
- Large Diameter HDPE Water Pipe 5 Pieces / (Min. Order)
- HDPE Polyethylene Pipe 5 Pieces / (Min. Order)